Remember

Important

Do not use your surface for 48 hours after it has been refinished.

Absolutely nothing should be put on top of the fixture for 48 hours. Especially water, this is to allow the new finish to cure.

If masking tape or paper has been left, remove it by peeling it off in an upward and outward direction. Use particular care around the drain and overflow areas.

Full Curing Of The Finish

A full cure will take 7 days. During this period please observe the following:

• Do not lay soap, bottles or any object on the reglazed surface.
• Be sure that the taps are closed tightly and are dry every evening.
• Clean the finish gently with soap and a soft sponge.

Long Term Maintenance

• Do not use abrasive cleaners as they will damage the finish by scratching the surface.
• Do not use cleansers with bleach as this will damage the surface, turning it dull and brittle.
• Do not slice items without a cutting board as this will damage the area with cut marks.
• Do not drop sharp or heavy objects on the surface which may cause it to chip or scratch.
• Do not allow the faucets to leak. Leaky faucets must be repaired to protect the finish against the eroding action of constant dripping water, which may cause the surface to stain, crack or wear prematurely.
• Do not use acid bearing compounds (drain openers). All chemicals must be kept away from the surface.
• Cosmetics, hair dyes and perfumes could also stain or damage the finish and should be kept away from surface.
• Do not use rubberized mats or daisy stickers on the bathtub, as they will damage the surface when removed. Most mats will produce a reaction with the finish when subjected to hot water.
• CLEAN the surface at least once weekly, with a cloth or sponge moistened with soap and water. The best cleaners for surfaces are spray cleaners or spray foam for tubs and tile.